Brownells Danmark - Alt I våbendele, genladeudstyr, projektiler, hylstre, magasiner, optik og skytteudstyr Danmark

APEX TACTICAL SPECIALTIES INC S&W M&P M2.0 FLAT FACED FORWARD SET TRIGGER KIT


S&W M&P M2.0 Flat Faced Forward Set Trigger Kit

Automatisk oversat beskrivelse (Original beskrivelse - Producent): Apex Tacticals S&W M&P M2.0 Fladvendt fremadrettet udløsersæt er en let at installere udskiftning til din M2.0s fabriksudløser, der giver dig en lettere, glattere og mere ensartet triggertræk. Den solide triggerkrop giver en mere komfortabel grænseflade med fingeren for bedre kontrol, samtidig med at den fuldt ud bevarer pålidelige funktioner fra fabriksudløsersikkerhedssystemet. Mere...

Produktnr.: 100026293 854263007227 100026293
Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
2439 2439 1 DKK
100026293
S&W M&P M2.0 Flat Faced Forward Set Trigger Kit
Mfr Part: 100154 854263007227 Apex Tacticals S&W M&P M2.0 Fladvendt fremadrettet udløsersæt er en let at installere udskiftning til din M2.0s fabriksudløser, der giver dig en lettere, glattere og mere ensartet triggertræk. Den solide triggerkrop giver en mere komfortabel grænseflade med fingeren for bedre kontrol, samtidig med at den fuldt ud bevarer pålidelige funktioner fra fabriksudløsersikkerhedssystemet. M&P M2.0 fladvendt fremadrettet udløser har reduceret forkørslen og overrejsen markant med en skarp, afgørende pause imellem. Kortere, mere positiv nulstilling betyder hurtigere opfølgningsskud. Reducerer den samlede triggerkørsel med ca. 40% Glatter ud af trækket og gør det mere konsistent Lyser trækvægten med ca. 2 lbs. til 4-6 lbs. Den faktiske trækvægt afhænger af sværge- og aftrækkerreturfjedrene, du installerer (og variationer i individuelle kanoner) Apex inkluderer to sværgefjedre og to udløsningsreturfjedre i sættet, så du kan "indstille" udløseren til dine specifikke skydebehov. Vælg "pligt / bære" fjedre for at indstille trækvægt for drifts- eller CCW-bærepistoler. M&P M2.0 Flat-Faced Forward Set Trigger's kontur giver dig også mulighed for at placere fingeren lavere på triggerfladen for ekstra gearing, der hjælper dig med at drage maksimal fordel af den lavere trækvægt. Med lidt opmærksomhed på korrekt placering af fingre er den fladvendte fremadrettede trigger en fremragende trigger til konkurrencepistoler. Brownells Gun Tech ™ Bemærk: Dette Apex Tactical fladvendt fremadrettet udløsersæt er kun til installation i Smith & Wesson M&P M2.0-pistoler i alle midterste ildkalibre og konfigurationer, inklusive M&P 2.0 Compact. Ikke til brug i originale M & P-modeller; Brug # 100-016-327 eller # 100-017-344 i originale M&P-pistoler.Sættet inkluderer følgende komponenter: Fladvendt fremadrettet udløser Udad Sæt aktuator 2-punkts fuldt bearbejdet Sear Heavy-Duty Sear Spring Duty / Carry Sear Spring Heavy-Duty Trigger Return Spring Duty / Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (hjælper med installation af trigger returfjeder)
2439 DKK 60 DKK 2.439,00 *

Forvent ca. 2-4 ugers leveringstid.
mere end 10 Stk. på lager i USA
Specifikationer: Finish: Sort Make: Smith & Wesson Model: M&P 2.0 Compact Style: Flat

Egenskaber

Finish: Sort Model: M&P 2.0 Compact Mærke (Producent): Smith & Wesson Style: Flat

Produkt detaljer

Amerikansk Eksport Klassifikation: I(h)



Apex Tactical’s S&W M&P M2.0 Flat-Faced Forward Set Trigger Kit is an easy-to-install replacement for your M2.0’s factory trigger that gives you a lighter, smoother, and more consistent trigger pull. The solid trigger body provides a more comfortable interface with the finger for better control, while fully preserving reliable function of the factory trigger safety system. The M&P M2.0 Flat-Faced Forward Set Trigger has significantly reduced pre-travel and over-travel, with a crisp, decisive break in between. Shorter, more positive reset means faster follow-up shots. Reduces overall trigger travel by about 40% Smooths out the trigger pull & makes it more consistent Lightens pull weight by approx. 2 lbs. to 4-6 lbs. Actual pull weight depends on the sear and trigger return springs you install (and variations in individual guns) Apex includes two sear springs and two trigger return springs in the kit, so you can "tune" the trigger to your specific shooting needs. Choose the "duty/carry" springs to set a pull weight for duty or CCW carry pistols. The M&P M2.0 Flat-Faced Forward Set Trigger’s contour also allows you to place your finger lower on the trigger face for extra leverage that helps you take maximum advantage of the lower pull weight. With a little attention to proper finger placement, the flat-faced forward set trigger is an excellent trigger for competition pistols. Brownells Gun Tech™ Note: This Apex Tactical Flat-Faced Forward Set Trigger Kit is for installation in Smith & Wesson M&P M2.0 pistols ONLY, in all centerfire calibers and configurations, including M&P 2.0 Compact. Not for use in original M&P models; use #100-016-327 or #100-017-344 in original M&P pistols. Kit includes the following components: Flat-Faced Forward Set Trigger Forward Set Sear Actuator 2-Dot Fully Machined Sear Heavy-Duty Sear Spring Duty/Carry Sear Spring Heavy-Duty Trigger Return Spring Duty/Carry Trigger Return Spring Ultimate Striker Block Kit (Striker Block, spring & Talon Tactical Tool) Slave pin (assists with installation of trigger return spring)
Forvent ca. 2-4 ugers leveringstid.
mere end 10 Stk. på lager i USA
Forvent ca. 2-4 ugers leveringstid.
mere end 10 Stk. på lager i USA
DKK 259,00 *
Forvent ca. 2-4 ugers leveringstid.
mere end 10 Stk. på lager i USA
Forvent ca. 2-4 ugers leveringstid.
mere end 10 Stk. på lager i USA
DKK 99,00 *
Kan restordre bestilles.
Leveringstid (ca. 5-8 uger).
Kan restordre bestilles.
Leveringstid (ca. 5-8 uger).
DKK 69,00 *