Brownells Danmark - Alt til jagt. Jagtudstyr, våben, våbendele, genladeudstyr, projektiler, hylstre, magasiner, optik m.m! Danmark

BROWNELLS JAMES MEEK'S BEGINNER'S KIT


James B. Meek Beginner's Kit

Automatisk oversat beskrivelse (Original beskrivelse - Producent): Vi bad James B. Meek, forfatter af The Art Of Engraving om hans anbefalinger. Mere...

Produktnr.: 080561000 080561000
Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.
BROWNELLS
0 0 1 DKK
080561000
James B. Meek Beginner's Kit Vi bad James B. Meek, forfatter af The Art Of Engraving om hans anbefalinger. Dette er, hvad han skrev: "Måske kan 90% af alt rullearbejdet i gravering udføres med følgende værktøjer". Point Graver nr. 4 skærer de fleste ruller. Fin detalje klippes med 0 point. Kniv nr. 2 er også til detaljer. Pladsen er måske den mest anvendte, kan også skærpes som et punkt, eller en mejsel, flade nr. 36 og 37 og runde nr. 50 og 54 er nødvendige for bogstaver med høj lettelse. Sættet indeholder: Punkt - nr. 0 og 4; Square - (2) GlenSteel Blanks; Lejlighed nr. 36 og 39; Kniv - nr. 2; Runde - nr. 50 og 54. I alt 9 graver.

Desværre, dette produkt kan ikke bestilles.



Basic Engraver Set Selected By Author Of Art of Engraving
We asked James B. Meek, author of The Art Of Engraving for his recommendations. This is what he wrote: "Perhaps 90% of all the scroll work in engraving can be done with the following tools". Point Graver No. 4 will cut most scrolls. Fine detail is cut with 0 Point. Knife No. 2 is also for detail. The Square is perhaps the most widely used, can also be sharpened as a point, or a chisel, Flat Nos. 36 and 37, and Round Nos. 50 and 54 are needed for lettering on high relief. Kit contains: Point - Nos. 0 and 4; Square - (2) GlenSteel Blanks; Flat - Nos. 36 and 39; Knife - No. 2; Round - Nos. 50 and 54. 9 gravers total.
SPECS: Approximately 4-3/8" (11.1cm) long. Shank tapers from 3/16" (4.8mm) to 1/16" (1.6mm). Blanks are 4" (10.2cm) long. Steel.